Filter
Top Products
Audio Command Center Series Manual — P/N 51889:E1 6/8/2010 135
MS-5UD-3/7 and MS-10UD-3/7 Programmed Activation by FACP
Press the 1 key to access the first ANN-BUS programming screen as shown below
Press the down arrow key twice to view the following screen:
Pressing 1 for ANN-AUDIO Options while viewing ANN-BUS Screen #3 will cause the following
screen to be displayed:
ANN-BUS
1=BUS ENABLED
2=BUS MODULES
3=AUTO CONFIGURE
ANN-BUS
1=ANN-AUDIO OPTIONS
ANN-AUDIO OPTIONS
1=ALL CALL ZONE 1
ANN-AUDIO Options Screen