Filter
Top Products
22 • Chapter 2 Getting Started DMC-1700/1800
7. Once the controller is properly entered into the Windows registry, it should also be present in
the Galil Registry. The address and IRQ jumpers on the controller may need to be changed depending
on the resources available in Windows (see Step 3 for setting address and IRQ jumpers). Connect to
the controller through the Terminal utility in DMCWIN32, WSDK32, or DMCTERM.
Using Galil Software for Windows NT 4
In Windows NT 4, the DMC-1800 is also plug and play. This means that on power up the computer
will automatically detect the card and install the appropriate device driver. A ‘Found New Hardware’
dialog box may appear during installation of the device driver. The controller will be identified by
model name and entered into the Galil Registry. Now the user can communicate to the controller using
DMCTERM, DMCWIN32, or WSDK32.
To use a DMC-1700 in Win NT4, add the controller using the Galil Registry dialog. To access the
registry in DMCTERM and WSDK, click on the File menu and “Register Controller”. In
DMCWIN32, select the Registry menu.