Filter
Top Products
DMC-1700/1800 Appendices • 211
DMC-1700 Utilities Utilities for Plug & Play, COMDISK, firmware
DMC-1800 Utilities Utilities for Plug & Play, COMDISK, firmware
WSDK-16 Servo Design Kit for Windows 3.X
WSDK-32 Servo Design Kit for Windows 98SE, NT4.0, 2000 or XP
VBX Tool Kit Visual Basic
TM
Tool Kit (includes VBXs and OCXs)
Setup 16 Set-up software for Windows 3.X
Setup 32 Set-up software for Windows 98SE, NT4.0, 2000 or XP
CAD-to-DMC AutoCAD
R
DXF translator
G-CODES-to-DMC G-code translator
HPGL HPGL translator
PC/AT Interrupts and Their Vectors
(These occur on the first 8259)
IRQ VECTOR USAGE
0 8 or 08h Timer chip (DON’T USE THIS!)
1 9 or 09h Keyboard (DON’T USE THIS!)
2 10 or 0ah Cascade from second 8259 (DON’T USE THIS!)
3 11 or 0bh COM2:
4 12 or 0ch COM1:
5 13 or 0dh LPT2:
6 14 or 0eh Floppy (DON’T USE THIS!)
7 15 or 0fh LPT1:
(These occur on the second 8259)
IRQ VECTOR USAGE
8 104 or 70h Real-time clock (DON’T USE THIS!)
9 105 or 71h Redirect-cascade (DON’T USE THIS!)
10 106 or 72h
11 107 or 73h
12 108 or 74h Mouse DSR
13 109 or 75h Math Co-processor exception
14 110 or 76h Fixed Disk (DON’T USE THIS!)
15 111 or 77h
ICM-1900 Interconnect Module
The ICM-1900 interconnect module provides easy connections between the DMC-1700/1800 series controllers and
other system elements, such as amplifiers, encoders, and external switches. The ICM- 1900 accepts the 100-pin
main cable and 25-pin auxiliary cable and breaks them into screw-type terminals. Each screw terminal is labeled for
quick connection of system elements. An ICM-1900 is required for each set of 4 axes. (Two required for DMC-
1750 thru DMC-1780 or DMC-1850).