Filter
Top Products
63
Installation/Set up
Viewing • Listening
and Operation
Recording
Setting up
Others
● Setting Sound
You can set up the camera to listen to sound on the camera even when logging in
as User.
1) Set “Sound” to “ON” or “OFF.”
ON: To enable you to listen to sound on the camera even when logging in as
User.
(You can configure sound settings in “Audio Settings” (➝ page. 74).)
OFF: To disable you to listen to sound on the camera when logging in as User.
(“Audio Settings” (➝ page. 74) is not displayed when logging in as User.)
2) Click the “Set” button.
● Viewing the level of SD memory card
Click the “Reload” button.
● Formatting an SD memory card
Click the “Complete Format” or “Quick Format.”
The SD memory card is formatted used for the camera.
Complete Format: To delete all the data in the card. Only the log for the complete
format remains.
Quick Format:
To delete all the data except logs in the card.
● Restarting the camera
Click the “Reboot IP Camera.”
Important
●
To change an SD memory card, turn off the camera once to switch cards and then turn
on the power of the camera again. When the camera is powered with PoE, disconnect
the LAN cable once to switch cards and then connect the LAN cable again.
IK-WB02-61-65 2004.10.21, 13:4363