Filter
Top Products
91
Installation/Set up
Viewing • Listening
and Operation
Recording
Setting up
Others
No images are
displayed.
The colors of
images are poor.
Cannot display
images from the
network camera.
Renewal speed
of network
camera images
is too slow.
(Part 1)
Renewal speed
of network
camera images
is too slow.
(Part 2)
The network
camera images
are reversed in
upside-down.
●
The iris switch is not set
properly.
●
The iris of your lens is
not adjusted properly.
●
Any of the cables are not
connected properly.
●
The video monitor is not
adjusted properly.
●
Lightings are dim.
●
The Internet line is busy.
●
There are not enough
resources (CPU power,
RAM).
●
Picture size is too large.
●
Picture quality is too
high.
●
More than one users are
accessing the camera at
the same time.
●
Installed the camera in
wrong way.
●
Set the iris switch properly for your lens.
●
Adjust the iris of your lens properly.
●
Connect the cable properly.
●
Adjust the video monitor properly.
●
Brighten the lightings.
●
Wait for a little while. Sometimes it takes time to display
images.
●
There are the recommended requirements of PC to
view the images of the network camera.
( page 12)
●
Close all applications other than the network camera
browser.
●
The default setting of picture size is QVGA(320x240).
To increase the speed, select a small image size in
“Resolution” of “Camera Window.”
●
When you lower the image quality in “Quality” of
“Camera Window,” the renewal speed becomes faster;
however, the picture quality becomes poor.
●
When many users access to the camera at the same
time, the renewal speed of the image becomes slow.
●
Make sure that the camera is installed in right way.
Adjust the setting to place the “Toshiba” logo in the
right direction.
Symptom Cause
How to Manage
IK-WB02-88-94 2004.10.21, 02:4391