Filter
Top Products
59
Installation/Set up
Viewing • Listening
and Operation
Recording
Setting up
Others
■Rebooting the network camera
You can restart the network camera.
1) Click “Reboot IP Camera.”
A confirmation message appears, asking whether or not the camera should be
rebooted.
2) Click “OK.”
■Updating the Firmware
You can update the firmware on the network camera.
Click “Firmware update.”
For details, refer to “Updating the Firmware” ( page. 75).
■Click “Firmware update.”
You can save the network camera settings on a personal computer.
Click “Export current configurations.”
For details, refer to “Saving the Settings on a Personal Computer” ( page. 77).
When updating the firmware, the settings are reset. Make sure to save the settings of
the camera on your personal computer before starting update operation.
■Importing the Settings Saved on a Personal Computer
You can import the settings saved on a personal computer to the network camera.
Click “Import new configurations.”
For details, refer to “Saving the Settings on a Personal Computer” ( page. 77).
IK-WB02-55-60 2004.10.21, 10:2659