23
Installation/Set up
Viewing • Listening
and Operation
Recording
Setting up
Others
Select “Manually.”
●
The default setting is “Automatically by DHCP.”
Fill in “IP Address,” “Subnet Mask,” “Default Gateway,”
“DNS1” and “DNS2.”
Important
●
If you do not know the subnet mask, consult the provider or network system
administration support center.
●
You do not need to enter the default gateway if the network camera will not be
accessed from another network. If you do need to enter a default gateway, consult the
network system administration support center.
Click the “Save” button.
●
The settings are registered.
IK-WB02-07-24 2004.10.21, 01:5723