Filter
Top Products
44
Installation/Set up
Viewing • Listening
and Operation
Recording
Setting up
Others
Recording Images on FTP Server (Cont.)
■Periodic FTP by Schedule
You can control the settings to record images for Periodic FTP by Schedule.
To run the recording, select “Periodic” in “Connection to FTP Enable” (➝ page. 43).
1) Configure recording schedule
Select one of the setting items for each day of a week.
“OFF”: No recording at all.
“All Day”: Records images all day.
“Timer Pattern 1”:
Records images in a period you configured in “Timer Pattern 1”.
“Timer Pattern 2”:
Records images in a period you configured in “Timer Pattern 2”.
2) Configure timer pattern
●
You may configure both “Timer Pattern 1” and “Timer Pattern 2” and use them
according to your need.
Possible setting timer range is between 00 am and 11 pm for both “Start” and
“Stop”.
3) Configure Interval(s)
●
Records 1 image per configured recording cycle (second).
●
Setting ranges are 1 through 10.
●
Configured recording cycle will be reflected to “All Day”, “Timer Pattern 1” and
“Timer Pattern 2”.
NOTE
• The cycle may shift depending of Resolution (image size) and networking
conditions.
IK-WB02-37-46 2004.10.21, 02:1644