Filter
Top Products
90
Installation/Set up
Viewing • Listening
and Operation
Recording
Setting up
Others
Before Calling Service Personnel... (Cont.)
Cannot perform
settings.
●
Lost the power of the
camera during the
performance.
●
LAN cable of the camera
has been pulled off
during the performance.
●
LAN cable of the PC has
been pulled off during the
performance.
●
Lost the power of a hub
or router during the
performance.
●
IP address in
“Connection Settings” in
“Network Settings” has
been changed.
●
Make sure that the power of the network camera is ON.
●
Make sure that the LAN cable is connected to a hub or
router in the right way.
●
Make sure that the LAN cable is connected to a hub or
router in the right way.
●
Make sure that the power of a hub or router is ON.
●
If you change the IP address, you cannot keep your
settings in the setting screen with your old IP address.
Search your camera with the application, Camera
Finder, and try administrator login procedure again.
●
When you enter IP address of the camera directly to
the browser, enter the new IP address in URL like
example below, and try login procedure again.
http://192.168.0.40/
Symptom Cause
How to Manage
IK-WB02-88-94 2004.10.21, 02:4390