Filter
Top Products
42
Installation/Set up
Viewing • Listening
and Operation
Recording
Setting up
Others
Configure each setting items.
■FTP General Settings
You can control the settings to connect to an FTP server.
●FTP sever:
Select either one of them below and enter correct information.
•
Server Name
•
IP Address
●User ID:
Only for a user who has the right to access FTP server. Ask FTP server
administrator for details.
●Password:
•
Enter password registered with user ID above.
●Port Number:
Usually, enter “21”.
Important
•
Do not change the port number unless your provider or the network
administrator instructs you to do so.
●MODE:
•
PORT (active mode): Select PORT if you are unsure about which mode to
choose.
•
PASV (passive mode): When the camera’s network environment is protected by
Firewall or the like, access from outside FTP server may
not be possible with PORT (active mode). In this case,
select PASV (passive mode).
●Connection to FTP Server:
•
Select “Stay connect” when transferring data frequently, like “Periodic FTP by
Schedule”. In this way, you can record images faster.
Recording Images on FTP Server (Cont.)
IK-WB02-37-46 2004.10.21, 02:1642