Filter
Top Products
40
Installation/Set up
Viewing • Listening
and Operation
Recording
Setting up
Others
Configure each setting items.
■Alarm Recording
●External Alarm
ON: To record images when an external alarm occurs.
OFF: Does not to record images when an external alarm occurs.
●Motion Detection
ON: To record images when a motion is detected
OFF: Not to record images when a motion is detected
●Pre-Recording
Pre-Recording records image(s) of right before alarm was generated.
You can set numbers of frames you want to record. The image at the moment the
alarm was generated will not be included.
●Post-Recording
The Post-Recording records image (s) at the moment and after an alarm was
generated.
You can set numbers of frames you want to record.
●Interval(s)
Configures recording cycle of Pro-Recording and Post Recording.
■Normal
ON: To record images depending on the recording intervals and timer association
OFF: Not to operate normal recording
●Interval(s)
Configure recording cycle of Normal Recording images.
●Timer Association
ON: To turn on the timer association
OFF: To turn off the timer association
When “Timer Association” is set to “ON,” configure the start/stop time for
recording.
●Overwrite
ON: To overwrite data in the order of the oldest to the newest when the SD
memory card becomes full during recording.
OFF: To stop recording when the SD memory card becomes full during record-
ing.
To finish configuring Recording Settings, click the “Save”
button below the setting.
●
The changes are saved.
NOTE
• Total number of recorded image frames per one alarm will be the sum of Pre-Recording
image(s) + Post-Recording image(s).
• To configure the external alarm/motion detection, select “ON” in “External Alarm Detect”
or select “Enable” in “Motion Detect” in the alarm settings (➝ page. 64).
Recording Images on an SD Memory Card (Cont.)
IK-WB02-37-46 2004.10.21, 02:1640