Pfaff 2170 Sewing Machine User Manual


 
Decorative sewing
4:13
Placing single stitches
For each additional stitch you want to place, touch the con rm icon (E).
To move single stitches
With your stylus or your nger you can work with your stitches
directly on the work space by dragging and dropping a selected stitch
point. To position a stitch point just touch it on the screen and drag it to
the desired position. When you do this you will change the stitch width
and the stitch length of the selected stitch.
Another way to move the stitch point of a selected stitch and for ne
adjustment is to use the stitch length (T) and stitch width icons (U).
The last stitch of the sequence is marked with blue and the last stitch
point is marked with a red frame.
The dotted line, the cursor line (V), at the end of the last stitch shows
where the following stitch will be added (if the x-coordinate of the last
stitch is not the same as the rst stitch). This ensures that the fabric is
fed evenly when you sew out your stitch pattern.
If you place the last stitch exactly at the same position (x-coordinate)
as the rst one of your stitch pattern the dotted cursor line will not be
sewn.
Touch the Start sewing (E) to open the sewing menu.
Now you can see the whole sequence of your stitch pattern and sew it.
Only when this screen is open you can sew out your stitch pattern.
Touch ESC to return to the Stitch Creator menu, for further editing.
E
U
T
V