Filter
Top Products
Embroidery
5:35
Zoom In
For easier positioning of the designs within a combination, you can
use the zoom function to enlarge the designs on the screen. Touch the
Zoom In icon (G) to zoom in the pictured designs in steps up to 800%.
If you want to select a different design in the combination you can do
that with the selection arrows.
Move the zoomed area
When zoomed in, you cannot see the whole combination. On the
screen, you can fi nd two scroll bars. Use the scroll bars to ”move” the
enlarged combination within the visible hoop area.
Touch a scroll bar with your fi ngertip and drag upwards or
downwards depending on what part of the combination you want to
see. Drag downwards to see the lower part of the combination and
upwards to see the upper part.
If you drag the lower scroll bar to the right, you can see the right part of
the combination, the opposite happens if you drag it to the left. If you
have activated the Move design icon or the Rotate icon, you can move
or rotate your design or combination also when it is zoomed.
With the Zoom out icon (H) you zoom out again step by step. Before
you start embroider, the combination has to be shown in its natural
size.
G
H