Sewing
3. Manual ending of a side seam
To repeat a program several times, touch the Prog icon and the desired
sewing direction before starting to sew. If you also touch the man icon
(E), your Pfaff creative 2170 sews one side and then stops. The length of
the sides are determined in the same way as described in section 1. The
machine stops after each side. Press the foot control to continue with
the next side.
4. Manual ending of a saved rectangle
Even if a rectangle has been programmed and the Prog icon ticked off
is visible on the screen, you can decide the length of the sewn seams by
touching the Man icon (E). The machine slows down at the end of the
third and fourth seam. End the seam by pressing the reverse button,
the machine completes the current stitch, places the needle in the outer
position and continues with the next side.
More functions for four sewing directions
Touch Balance icon (F) to open a screen to balance the rectangle. To
adjust the length of the sides, use a sewn sample as a template.
With the +/- icons (G), you can adjust the rectangle on the screen
until it looks like your sewn sample. The rectangle will be adjusted
automatically the next time you sew.
Touch the Data Manager icon (H) to open, save, delete or close a
program.
A detailed description of the icons is found in the beginning of this
chapter.
Touch Esc (I) to return to the selection menu.
Touch the Main menu icon (J) to return to the main menu.
E
F
H
J
I
G
3:26