Filter
Top Products
Embroidery
5:21
Embroider
1. Press the reverse button (or the foot control), the machine starts
embroidering. Tie-off is performed at the start of the design.
Note: Holding the reverse button for a few seconds will also start your embroidery.
2. A window appear with the following query:
If you wish to embroider without pressing the foot control, please
confi rm now with OK.
3. After a few stitches, release the foot control and cut off the thread
tail. The window is closed.
4. If you press the foot control again and confi rm this message during
embroidering with OK, the machine keeps on embroidering.
5. When a color segment is completed, the machine stops
automatically.
6. Each color segment is tied off at the end and the threads are cut.
7. Touch the Data manager icon (D) to save. This opens a window for
opening, saving, deleting and closing an embroidery combination.
Adjust an embroidery combination
To adjust single designs within the embroidery combination or an
entire embroidery combination, they must be selected.
Select a single design
When opening a screen the last inserted design is automatically
selected. To select a different design, just move to the desired design
using the arrows (E). The selected design is surrounded by a blue
frame. When a design is selected, all its settings can be adjusted. Just
touch the icon for the desired operation.
D
E