Filter
Top Products
3 - 16
3 COMMON PARAMETERS
(3) Setting of the Motion CPU control modules by the PLC CPU
Follow the table below when Motion CPU control modules are set in I/O
Assignment Settings of the PLC CPU. (The PLC CPU handles the Q172LX,
Q172EX and Q173PX as intelligent function modules having 32 occupied points.)
Type and number of points may be left unset.
Module name Type Number of points Remarks
Input module Input
Output module Output
Input/Output composite
module
Composite I/O
Selected according
to the module.
Analogue input module Analogue input
Analogue output module Analogue output
Interrupt module (QI60) Interrupt
16 points
Q172LX 32 points
Q172EX 32 points
Q173PX
Intelligent
32 points
• For the control CPU,
set the CPU that
corresponds to the
Motion CPU (required).
• Type and number of
points may be left
unset.
POINT
(1) Set the I/O device of the Motion CPU within the range from PX/PY000 to
PX/PYFFF. Set the number of real I/O points within 256 points. (I/O No. may
not be consecutive.)
(2) As for the Motion CPU, the Q172LX, Q172EX, Q173PX and QI60 are not
included in the number of real I/O points.