Filter
Top Products
03_NVspec_ver304e
24
Spacetemp Width
network input config SNVT_temp_p nciAnalogWidth;
This configuration property defines the minimum variation width of the output when nvoSpaceTemp_n
(Space Temperature) changes.
The objective variable is given below.
・nvoSpaceTemp_n（Space Temperature）
Valid Range
The valid ran
g
e covers from 0.5 to 2.0 second
(p
er 0.5 ℃
)
.
＊The settin
g
to -0.01℃
(
0xFFFF
)
result in 1.0℃.
The settin
g
to 2.01 - 327.66 ℃ results in 2.0℃.
Default Value
- 0.01℃(judged as 1.0 ℃)
25
Monitoring Time
network input config SNVT_time_sec nciAnlgMonTm;
This configuration property defines the indoor temperature monitor interval from the LM adaptor to the indoor unit.
Valid Range
The valid range covers from 600.0 to 6540.0 seconds (per 10 seconds).
The setting to 0.0 or 6553.5 seconds results in 600.0 seconds.
The setting to 0.1 - 599.9 seconds results in 600.0 seconds.
The setting to 6540.1 - 6553.4 seconds results in 6540.0 seconds.
To obtain the output within 10 minutes, set the connecting indoor to 30 sets or less.
Please turn ON the switch(SW1-3) on LM ADAPTER.(Factory setting "OFF")
The valid ran
g
e in this case becomes as 60.0 ～ 6540.0 seconds
(p
e
r
10 seconds
)
.
The setting to 0.0 or 6553.5 seconds results in 600.0 seconds.
The setting to 0.1 - 59.9 seconds results in 60.0 seconds.
The setting to 6540.1 - 6553.4 seconds results in 6540.0 seconds.
Default Value
6553.5 seconds (judged as 600 seconds)
WSN02-2124 - 41 -