Filter
Top Products
IntelliKnight 5820XL Installation Manual
8-8 151209
5. A screen similar to those shown in Figure 8-4 will display.
Figure 8-4 Checking Detector Sensitivity Compliance
If a printer is attached to the system (via a Module 5824 serial/parallel interface module), you
can print detector status (see Section 8.5.17).
8.5.12 View Status of a Point
1. From the Main Menu, select for Point Status.
2. From the list that displays, press to select the module where this point is located.
The screen that displays will show you if the point has a trouble and will provide sensitiv-
ity compliance information. (See Section 8.5.11 for complete information about detector
sensitivity compliance.)
8.5.13 View Alarms or Troubles
When the system is in alarm or trouble, you can press to view the location of an alarm or
trouble. See Section 8.5.13 for more information.
8.5.14 View System Information
Press from the Main Menu to view the panel model and serial number and system version
number and date. The information displays for several seconds then returns to the main menu.
8.5.15 Reset dialer
From the Main Menu, select . The LCD will display “Dialer reset in progress...” You will be
returned to the Main Menu when the reset is completed.
2
ENTER
8
6