Filter
Top Products
IntelliKnight 5820XL Installation Manual
7-6 151209
7.4.1.1 Edit Zone Name
7. Press to edit the selected zone’s name.
A screen similar to the one shown in Figure 7-2 displays.
Figure 7-2 Selecting Character for Zone Name
8. Select the characters for the zone name by pressing the or arrow until the desired
character is shown then press .
OR
Enter the Numerical Designator for the character you want, then press . See Appendix B for
a list of available characters and their numeric designators.
9. Repeat step 8 until the name is complete.
10. Press when the name is complete.
7.4.1.2 Edit Zone Properties
Zone properties consist of alarm delay characteristics, and heat detector sensitivity.
1. Do steps 1 through 6 of Section 7.4.1.
2. Press to edit the properties of the selected zone.
1
2
Detection type also selected from this screen
(see Table 7-1).