Filter
Top Products
Programming
151209 7-25
Or
Press to skip point name edit.
16. Repeat Steps 1 through 15 for all circuits.
Table 7-6: Menu choices for Internal/External Power Module
Choices Type Selections
Function
Selections for
each Type
Comments
Enter Point or Circuit
Select Type
UNUSED
B NOTIF
A NOTIF
AUX PWR
CONSTANT Constant auxiliary power.
RESETTABLE Resettable auxiliary power.
DOOR Door holder auxiliary power.
B SWITCH
MAN PULL Refer to comments column of
Table 7-5 for description of these
options.
Latch or Non-latching feature only
appears for waterflow, supervisory,
tamper, zone aux1, zone aux2, system
aux1, and system aux2.
WATERFLOW
SUPERVSY
TAMPER
FIREDRILL
SILENCE
RESET
PAS_ACK
ZN_AUX1
ZN_AUX2
SYS_AUX1
SYS_AUX2
MAN REL
ILOCK
A SWITCH Same as B SWITCH Used for
B DETECTOR
2-WIRE SMK Used for Class B, 2-wire detectors.
4-WIRE SMK Used for Class B, 4-wire detectors.
A DETECTOR
2-WIRE SMK Used for Class A, 2-wire detectors.
4-WIRE SMK Used for Class A, 4-wire detectors.
Select Zone/Group Group or Zone selection will appear
depending on the type selected.
Edit Name See Section 7.3.1.1.