Filter
Top Products
Programming
151209 7-35
disabled by default. For 5211 installation, see Section 4.12.
Note: Ground start cannot be used in UL installations.
12. Select Y (ground start used monitor line) or N (ground start not used don’t monitor line)
by pressing the or arrow, then press .
7.7.2.7 Answering Machine Bypass
This option is used in conjunction with the 5660 SKSS. This feature ensures that an answering
machine will not interfere with communication between the panel and the computer. If an
answering machine is used at the panel site, enable this feature; if an answering machine is not
used, disable the feature.
This option is factory-programmed as Yes (enabled).
The selection made here must match the programming for this option in the Communication
Configuration dialog box of the 5660 SKSS. See the 5660 SKSS manual for more information
(PN 151240).
13. Select Y (answering machine bypass enabled) or N (answering machine bypass disabled)
by pressing the or arrow, then press .
7.7.3 Sys. Event Outputs
1. Enter the installer code.
2. Press or to display the main menu.
3. Select for Program Menu.
Display reads: Initializing
Please wait . . .
4. From the Program Menu, select for System Options.
5. From the System Options Menu, select for Sys. Event Outputs.
7
5
2