Filter
Top Products
Programming Overview
151209 6-11
6.4.1 Entering & Exiting the Program Menu
To enter Program Mode:
1. Enter the Installer Code (factory programmed default code is 5820).
2. The display prompts you to press the or key to bring up the Main Menu (see Figure
6-7).
Figure 6-7 Keypad Enabled Screen
3. Then press . The menu option displays. See Section 7 for detailed menu information and
Section 6.5 for a quick reference listing all programmable options and JumpStart defaults.
To exit Program Mode:
When you have completed working with the menus, press (left arrow) several times until
you are exited from programming mode. Two prompts will display. The first prompt is to
make sure you intended to leave the Program Menu (select Yes or No as appropriate). The
second prompt is for accepting all changes. If you select No, any changes you have made
since you entered the Program Menu will have no effect.
6.4.1.1 Moving through the Menus
Figure 6-8 shows how to move through Program Menu screens, using the System Options
screen as an example.
Figure 6-8 Moving through Program Menu
(System Options Sub-Menu Used as an Example)
7