Filter
Top Products
Connection
The current sensing relay is connected in series with
the mill motor via a current transformer.
The transformer is connected between M and E1/E2/E3
depending on the secondary current.
(For transformers with transformation to 1 A, this is
connected to E2.)
Default setting for this granulator:
Granulator motor, rated current: . . . . . . . . . . . . . . . . . . .= . . . . . . . A
Current transformer: . . . . . . . . . . . . . . . . . . . . . . ./1A
Start delay T1: 0,1 sec. other value: . . . . . . . . . . . . . . . . . .
Reaction time T2: 3,0 sec. other value: . . . . . . . . . . . . . . . . . .
Limit values: % . . . . . . . . . . . . . = . . . . . . . . . . . . . . . . . A
Hysteresis: % . . . . . . . . . . . . . = . . . . . . . . . . . . . . . . . A
9-4 l Wiring Diagram