Filter
Top Products
Service
All service must be carried out by trained personnel in order to avoid personal
injury or damage to the machine.
Changing the knives
Removing the knives
Check the screen for wear when the knives are changed. Change the screen when
the holes begin to be pear shaped.
Be careful when handling the knives, they
are sharp and can cause personal injury.
Use protective gloves!
Each time the knives are changed, the knife
fastening screws must be replaced by new
ones.
Changing the knives.
Open the hopper and any door. Remove the granule bin, then fold the screen box
down and lift it out – see Section 5.3.
Removing the rotating knives.
1 Remove the screws (A) and washers (B),
2 each per knife. The knives are now loose.
2 Lift out the rotating knives.
3 Clean the surfaces where the knives were
located.
Removing the fixed knives.
4 Undo the socket cap screws (C) on the
front knife support rule (D).
NOTE: Hold the fixed knife and support
rule before removing the last screw.
5 Lift out the fixed knife together with the
support rule.
6 Clean the knife location.
7 Put the support rule back loosely.
A, B
E F
D C
✐
7-2 l Service