Filter
Top Products
Operation and Daily Maintenance l 6-5
Cleaning (continued)
NOTE: Use protective goggles and make sure that no
material blows into the safety switches!
16 Clean the granule bin and the screen box.
17 Clean the cutter housing inside and outside.
18 Clean any transport pipes, blower and cyclone.
Re-install after cleaning
1 Install the blue screws.
2 Install the screen in the screen box.
3 Lift up the screen box and and tighten the star knobs to stop.
4 Install the granule bin.
5 Install the extraction pipe.
Alt. CHS series-machine with extraction fan, do up the quick
coupling on the outlet pipe stub.
6 Close the door.
7 Close the hopper. Check and make sure that no granulate remains .
on the mating flanges or surfaces.
8 Open and make sure that the tipping catch falls into the cutout.
9 Lock the hopper with the star knobs, tighten the knobs
properly to stop.
✐
6
Operation and Daily Maintenance