Filter
Top Products
4-2 l Safety Instructions
Safety Instructions
Conair granulators are designed for granulating injection moulded, blow moulded
and extruded plastic waste.
The specific technical data for this machine, concerning power and perfor-mance
etc. is described in detail in Section 2.
The granulator is equipped with safety switches, which are described in
Section 3.2.
Follow the instructions in this manual to avoid personal injury and damage
to machine components.
Always follow these safety measures when handling the granulator.
• Electrical installation must only be done by a competent
electrician!
• Before the granulator is opened for servicing and maintenance.
Always disconnect the power with both the main switch and
the switch on the granulator.
• Never put any part of your body through the granulator open-
ings, unless both the main switch and the switch on the granu-
lator are in “Off” (0) position.
• Be careful with the knives, they are sharp and can cause per-
sonal injury.
• If the rotor must be turned manually – do this with great care!
• Observe care when opening or closing the hopper and screen-
box, so as not to trap parts of the body.
• The granulator should not be able to start before the hopper
and screen box are properly closed.
• Never remove protective guards or pipes adjacent to the out-
let/granule bin.
• Granulators with belt conveyors! Observe care so that convey-
or belts with dogs do not grip clothing, or arms and feet.
• During maintenance, pull out the plug on the distribution box.