Filter
Top Products
44
T
ALL PANELS MUST BE IN PLACE WHEN RIGGING. DO NOT ATTEMPT TO FORK THESE UNITS IF NO SKID IS SUPPLIED.
CAUTION - NOTICE TO RIGGERS:
NOTES:
1. 1.50 dia. (38.1mm) lifting holes provided for field supplied clevis.
2. Rig with a minimum of 25 ft (7620mm) length chains or cables.
3. If central lifting point is used, it must be a minimum of 13 ft. (3962mm) above the top of the unit.
4. Spreader bars made from steel or double nailed, and notched 2x6's approximately 8 ft. (2438mm) long, must
be placed just above the top of the unit (and stacks) to reduce the risk of dam
age to the top of the unit and
coils.
5. If overhead rigging is not available, the unit can be moved on rollers or dragged. When unit is moved on
rollers, the unit skid, if equipped, must be removed. To lift the unit, use jacks at the rigging points. Use a
minimum of one roller every 6 ft. (1829mm) to distribute the load. If the unit is to be dragged, lift the unit as
described above, and place unit on a pad. Apply moving force to the pad, not the unit. When in its final
location, raise the unit and remove the pad.
30XA080
30XA080-CU
30XA090
30XA090-CU
30XA100
30XA100-CU
30XA110
30XA110-CU
30XA120
30XA120-CU
30XA140
30XA140-CU
30XA160
30XA160-CU
30XA180
30XA180-CU
30XA200
30XA200-CU
8849
9573
9866
10831
10092
11057
10223
11188
10357
11322
12628
13834
12858
14065
14675
16122
14780
16227
4021
4350
4483
4922
4586
5024
4645
5084
4706
5145
5739
6287
5843
6392
6669
7327
6717
7375
9829
10553
10936
11901
11162
12127
11293
12258
11427
12392
13788
14994
14018
15225
15925
17372
16030
17477
4466
4795
4969
5408
5072
5511
5132
5570
5193
5631
6266
6814
6371
6919
7237
7895
7285
7943
LBS KGS LBS KGS
30XA090-160
958 435 1255 569
SUBSTRACT THESE VALUES FOR UNITS W/O PUMPS
SINGLE PUMP DUAL PUMP
Fig. 16 — Unit Rigging Label Detail 30XA080-200
a30-4427