Filter
Top Products
12
[748]
[208]
[162]
[397]
[2236]
[2270]
[541]
[2300]
A
[2032]
[2174]
[2236]
[2270]
[356]
[1270]
[2769]
[397]
[162]
[1872]
[2410]
[5975]
[4162]
[3431]
[3048]
B
3/4 NPT Relief Conn. Female
5" Victaulic Entering
5" Victaulic Leaving Water
Water
Cooler Drain
3/8 NPT
Cooler Vent
3/8 NPT
Mounting Holes
Rigging Holes
(See DetailA)
Control Box
incoming power
supply (200,230v)
90.55
[2300]
22.02
[559]
235.24
[5975]
121.49
[3086]
109.03
[2769]
58.08
[1475]
33.96
[863]
16.1
[409]
8.8
[224]
7.2
[182]
2.8 [72]
21.28
[541]
135.03
[3431]
163.87
[4162]
in
out
Drain
a30-4407
TOP VIEW
FRONT VIEW
LEFT END VIEW
NOTES:
1. Unit must have clearances as follows:
Top — Do not restrict
Sides and Ends — 6 ft (1.8 m) from solid
surface.
2. Temperature relief devices are located on
liquid line and economizer assemblies and
have
1
/
4
-in. flare connection.
3.
3
/
8
-in. NPT vents and drains located in
each cooler head at each end of cooler.
4. Drawing depicts unit with single-point
power, standard two-pass cooler, and
nominal voltage range of 380 to 575 v.
Refer to the Packaged Chiller Builder pro-
gram for other configurations.
5. Dimensions are shown in inches. Dimen-
sions in [ ] are in millimeters.
6. Allow 8 ft (2.4 m) on either side of unit for
condenser coil removal.
30XA UNIT A B
140 44.63 [1134] 115.88 [2943]
160 44.61 [1133] 115.64 [2937]
Fig. 6 — 30XA140,160 Air-Cooled Liquid Chiller with Pump Dimensions