Filter
Top Products
– 148 –
9. How to change the program operation time
10. How to clear the program operation
• Clear of the day of the week
1) Push
PROGRAM
button.
2) Push
DAY
button and select the
reserve mark
to be cancelled.
3) Push
CLEAR
button. The program time
disappears.
4) Push
PROGRAM
button. The operation
reserve indication
disappears.
• Clear of a part of the program
1) Push
PROGRAM
button.
2) Push
DAY
button and select the
reserve mark
on a to be cancelled.
3) Push
SET
button.
4) Push
SET
button again to flash ON
or OFF time of the program to be
cancelled.
5) Push
CLEAR
button.
Then, a part of the program has been
cancelled. At the same time, the
remained programs are automatically
arranged.
6) Push
PROGRAM
button.
11. How to set up the holiday
• The operation reserve day can be
cancelled by setting up the holiday.
1) Push
CANCEL
button. The holiday setup
mark
flashes.
2) Push
DAY
button and select the
holiday setup mark
on the day
which the holiday is set.
3) Push
SET
button. The flashing
holiday setup indication
changes
on. (
)
• Clearance of [HOLIDAY] setup
1) Push
CANCEL
button.
2) Push
DAY
button and select the
holiday setup mark
on the day to
which the holiday is cancelled.
3) Push
SET
button. The holiday setup
mark
disappears and the operation
reserve mark
appears.
• Explanation of operation
The cancel setting day is temporarily
canceled, and from the next day, the
cancel setup mark
disappears and the
operation reserve mark
appears.
CAUTION
• For the day which does not set timer, the
cancellation cannot be set.
WEEKLY TIMER
ERROR
SuMoTuWeThFrSa
PROGRAM1
PROGRAM2
PROGRAM3
CHECK
PROGRAM
SET
DAY
HH MM
CLEAR
CANCEL
11
9
10
1. Push
PROGRAM
button in the normal display
status.
2. Select the required day reserve mark
by pushing
DAY
button.
3. Push
SET
button.
4. Each push
SET
button, the flashing
part changes in the following figure. Put
the indication on the time to be changed.
5. Using
HH
/
MM
buttons, change the time.
6. Push
SET
button.
7. Push
PROGRAM
button. Then the change
operation has completed.
ERROR
SuMoTuWeThFrSa
PROGRAM1
PROGRAM2
PROGRAM3
WEEKLY TIMER
ERROR
SuMoTuWeThFrSa
PROGRAM1
PROGRAM2
PROGRAM3
CHECK
PROGRAM
SET
DAY
HH MM
CLEAR
CANCEL
2. Operation of program weekly timer and air conditioner
An air conditioner mounted with a program weekly timer is operated on a remote
controller and on the program weekly timer.
(Example) 1) Operation pattern in a day
ERROR
SuMoTuWeThFrSa
PROGRAM1
PROGRAM2
PROGRAM3
ON :
Air conditioner
operation
OFF :
8:00
ON
12:40
ON
12:00
OFF
16:50
OFF
19:00
OFF
17:00
ON
Push Push PushPush
Program timer
ON/OFF setup
Remote controller
operation
Start/Stop button
SuMo
No timer operation
(No reserve)
No timer operation
(Reservation is canceled as holiday)
Timer operation
TuWeTh Fr Sa
12. Matters to be memorized
1. Power failure
When a power failure occurred and the power supply
has been reset, the display of the right figure appears.
(A colon “
:
” flashes.)
• Resuming of operation
1) Turn on the power (breaker) of the air condi-
tioner.
2) Start operation by the remote controller.
3) Push
PROGRAM
button of the program weekly timer.
The flashing colon “
:
” changes to the clock
display in the normal status. In this case, the
program is memorized by the backup function.
Therefore, it is unnecessary to set the program
again.
2) Operation pattern in a week
RBC-EXW21E