Filter
Top Products
AZI Customer Service 800-528-7411 or 602-470-1414 Page 54 of 92
Access Key Setup
This menu provides a means of
preventing unauthorized access to
memory start edit, calibration, and
setup menus. If Access Keys have
been activated by setting Activate
Keys: Yes, and a Master Key code has
been entered, the instrument will
prompt for the key code each time a
protected menu is accessed. If a key
code is present, setting Activate Keys:
No will provide temporary access to menus without having to enter any codes, and
then the existing code or codes can be easily re-activated by setting Activate Keys:
Yes.
Master Key
The master key code permits access to all menus protected by the access keys
(memory start edit, calibration, and setup menus). But access to calibration menus is
not restricted by an active master key unless a calibration key is also active. If the
master key code is lost, call AZI Customer Service at 800-528-7411 or
602-470-1414.
Calibration Key
If the memory start edit and setup menus have been protected by activating Access
Keys and entering a Master Key, an optional calibration key code restricts access to
the calibration menus, and therefore also offers selective access to the calibration
functions only.
Ethernet Setup
A Web Server option can be purchased
for the MAX 5000XL, and then the
instrument can be accessed from your
local area network (LAN) or intranet by
a PC. The Ethernet Setup menu
provides the necessary controls and
options to configure this connection.
Generally, the MAX 5000XL cannot be
viewed on the Internet because of
company firewalls, but it is possible and
requires a registered IP address.
See the Web Server section on page 75
for full details on the Web Server.
Call AZI customer service for more information and purchasing questions.