Filter
Top Products
AZI Customer Service 800-528-7411 or 602-470-1414 Page 38 of 92
To analyze a set of data:
Use the arrow keys to highlight the
data items to be included in the
analysis, and press the [ENT] key.
Notice that each selected item is
marked with a triangular symbol at the
left of the data item. If one has been
designated in error, move the selector
bar to it and press the [ENT] key to
deselect (and unmark) it. When all
desired items are selected, press
[ANALYZE].
The screen will immediately display
the number of samples, mean,
standard deviation, and relative
standard deviation of the selected
data set. To the right is an example
of a calculated report. This report can
be printed by pressing [PRINT].
Press the [ESC] key to return to the
previous menu.
Select All Data
All stored data can be selected to be deleted, analyzed, viewed or printed. To select
all stored data press [SEL ALL].