Filter
Top Products
AZI Customer Service 800-528-7411 or 602-470-1414 Page 24 of 92
Editing Test Parameters
The memory start parameters may be
edited by highlighting a memory start
and pressing the [ENT] key. From the
eight (8) primary selections, there are
many other selections available to
allow changing the data stored and
altering the test characteristics.
The keys at the bottom of the
display aid the editing process.
[DEL] – deletes the character
to the left of the cursor
[CLEAR] – erases all characters
in the edit field
[DEL] - deletes the character
to the right of the cursor
[+/-] (Displayed only when
applicable) – changes the
polarity (pos/neg) of the number
If a number key is pressed without
moving the cursor, the current
content will be erased and the new
key press entered. Press [ENT] to
save the changes or [ESC] to abort
the change and restore the original
content.
Sample Name
This menu allows an alphanumeric identification for the test to be established. If the
name is not blank when selected, the entry may be deleted and new alphanumeric
characters entered. Note that the editing box will hold more characters than can be
displayed on the Main Test Screen. In addition, the box will hold more narrow letters
like “I” than wide letters like “M.” Edit the value to any desired name or number to
identify the product under test.