Filter
Top Products
AZI Customer Service 800-528-7411 or 602-470-1414 Page 36 of 92
PRINT Memory Start
This command prints the stored parameters. All of the numbered Memory Start Sets
are printed, giving the values of the parameters shown below in the print out example.
COMPUTRAC MAX 5000XL MEMORY START REPORT
COMPANY: AZI Preferred Customer UNIT #: 500061
-----------------------------------------------------------------------------
# ID TST IDL HST SSZ SWN T/I TOT EC MODE
-----------------------------------------------------------------------------
1 WEIGHT 105 25 25 8.0 1.0 I No Rate 1.0000%/Minute
2 TARTRATE 150 80 25 8.0 1.0 I No Rate 0.0250%/Minute
3 LACTOSE MONOHYDR 135 80 25 4.0 0.5 I No Rate 0.1000%/Minute
4*MILK MOISTURE 210 50 25 5.0 0.5 I No Rate 0.1000%/Minute
5 MILK ASH 575 25 25 5.0 0.5 T No Rate 0.0500%/Minute
6 DRIFT 200 80 25 50.0 1.0 I No Time 20min
7 Memory Start 7 160 25 25 8.0 1.0 I No Rate 0.1000%/Minute
-----------------------------------------------------------------------------
128 Memory Start 160 25 25 8.0 1.0 I No Rate 0.1000%/Minute
129 Memory Start 160 25 25 8.0 1.0 I No Rate 0.1000%/Minute
250 Memory Start 160 25 25 8.0 1.0 I No Rate 0.1000%/Minute
Page #0X
NOTE: If all locations have been entered, a full printout of the
Memory Starts will take five pages to print all 250 sets, otherwise
only those Memory Starts that have been entered will be printed.
The column headings are abbreviations for the following:
#
Identification Number of the Memory Start Set
ID
Identification Name of the Memory Start Set (an * in the list
indicates the set is linked to the next Memory Set)
TST
Programmed Test Temperature
IDL
Programmed Idle Temperature
HST
Programmed HISTART Temperature
SSZ
Sample Size
SWN
Sample Window
T/I
Test selection using Total or Individual test result
TOT
Test calculation based on total weight
EC
Ending Criteria
MODE
Details for selected ending criteria