Filter
Top Products
AZI Customer Service 800-528-7411 or 602-470-1414 Page 17 of 92
To set up the MAX 5000XL, begin at the Main
Test Screen and press [Menu], (center key
below display) to access the Main Menu.
Select SETUP MENU, press [ENT].
Select PRINTER SETUP, press [ENT].
Highlight Parallel for printer only,
RS-232 for computer only, and Both for
the printer and computer at the same
time. When the correct port selection is
highlighted, press [ENT] again.
Move the select box to PRINTER TYPE
and press [ENT].
Select the type printer you have and
press [ENT].
Epson ESC/P2 is for older style Epson printers
Epson Raster is for Epson C84 and newer.
Seiko DPU is for the small, thermal printer.
Canon is for the older Canon Bubble Jet line of printers.
Move the select bar to AUTO FORM FEED. Pressing [ENT] toggles between YES
and NO. Selection will depend on the printer used. Try Auto Form Feed YES for
most printers. If the printer seems to waste paper, switch it to NO.
Press [ESC] to return to the REPORT SETUP Menu.
Select REPORT CONTROL OPTIONS,
press [ENT].
Press [ENT] key to toggle between YES
and NO. Select YES if you want to send
test results and reports to a printer or
computer and NO to prevent sending
test results as outputs.