Filter
Top Products
Operating the Thermostat
44
ViewStat Color Communicating Thermostat User Guide
5. Use the navigation buttons to select Advanced Setup.
6. Press Mode/Select to access the Security Code screen.
7. Enter the security code, and select Enter to access the User Preferences screen. See the Entering the
Security Code section on page 28 for more information.
8. Use the navigation buttons to highlight More, and press Mode/Select to access the second User
Preferences screen.
9. On the second User Preferences screen, use the navigation buttons to highlight More, and press
Mode/Select to access the third User Preferences screen.
10. Use the navigation buttons to highlight Advanced Setup, and press Mode/Select to access the
Advanced Setup screen.
11. Use the navigation buttons to highlight More, and press Mode/Select to access the second
Advanced Setup screen.
12. Use the navigation buttons to highlight Thermostat Setup, and press Mode/Select to access the
Thermostat Setup screen.
13. Use the navigation buttons to highlight More, and press Mode/Select to access the second
Thermostat Setup screen (see FIG. 35).
14. With Balance Point highlighted, press Mode/Select to activate it.
15. Press Mode/Select to indicate the balance point.
16. Use the navigation buttons to highlight Exit, and press Mode/Select to return to the second
Advanced Setup screen.
FIG. 35 Thermostat Setup screen (2 of 2)
The Balance Point option is only available if your thermostat is configured to operate as a heat
pump.