Filter
Top Products
Operating the Thermostat
28
ViewStat Color Communicating Thermostat User Guide
Changing User Preferences
Accessing Advanced Setup Options
Perform the following steps to access advanced setup options:
1. From the Main screen, press Mode/Select to access the Current Weather screen.
2. Press Mode/Select to access the 5-Day Forecast screen.
3. Press Mode/Select to access the Thermostat Mode screen.
4. Use the navigation buttons to select Settings, and press Mode/Select to access the Settings screen.
5. Use the navigation buttons to select Advanced Setup.
6. Press Mode/Select to access the Security Code screen (see FIG. 24).
Entering the Security Code
You must enter a security code to access the advanced setup options on the thermostat. The default
security code is 1988. See the Changing the Security Code section on page 28 for information on
changing the security code. Perform the following steps to enter the security code.
1. Use the navigation buttons to scroll through the numbers until you reach the first digit in the code,
and press Mode/Select to move to the next digit in the code.
2. Repeat the previous step until you have entered the full four-digit code.
3. Press Mode/Select while Enter is selected. If the code is correct, the User Preferences screen
appears (see FIG. 26).
Changing the Security Code
You can change the security code for the thermostat to a new four-digit code. If you change the security
code, store the new code in a safe location where you can access it if you ever forget it. If you forget your
new code and need to have it reset to a known value, you can reset the code through the NI Master.
Perform the following steps to change the security code.
1. From the Main screen, press Mode/Select to access the Current Weather screen.
2. Press Mode/Select to access the 5-Day Forecast screen.
3. Press Mode/Select to access the Thermostat Mode screen.
4. Use the navigation buttons to select Settings, and press Mode/Select to access the Settings screen.
5. Use the navigation buttons to select Advanced Setup.
6. Press Mode/Select to access the Security Code screen.
FIG. 24 Security Code screen