Filter
Top Products
Setup and Configuration
12
ViewStat Color Communicating Thermostat User Guide
Security Code Screen
The Security Code screen (FIG. 10) enables you to enter the security code for the thermostat. Without
entering a security code, the user cannot have access to advanced setup features or make changes to the
user preferences. The default security code is 1988. Pressing the Up/Down arrow buttons increases or
decreases the numeric value in the highlighted box. Pressing the Mode/Select button highlights the next
box in the sequence or highlights Enter if pressed while the fourth box is highlighted. Use Up/Down
arrow buttons to move between Enter and Cancel. Press the Mode/Select button while Enter is
highlighted to open the User Preferences screen. Press the Mode/Select button while Cancel is
highlighted to return to the Settings screen. To change the security code, see the Changing the Security
Code section on page 28.
FIG. 10 Security Code screen