Filter
Top Products
77
Selecting Settings
Be sure to select Auto Document Feeder (ADF) in the Document Source setting in
EPSON TWAIN. For more information on selecting driver settings, see the EPSON
TWAIN Users Guide.
Loading Documents Manually
You can load documents manually even when the ADF is installed.
Lift the ADF and place the document on the document table. Then lower the ADF
and scan the document.
Always close the ADF and its cover before scanning. If you are scanning thick material
or documents more than 1.6 inches (4 cm) thick, leave the ADF in the upright
position. Be sure to cover any exposed areas of the document table glass.
Be sure to select
Flatbed
in the Document Source settings in EPSON TWAIN.
Opening the auto document feeder or its cover while it is
operating results in an option error and stops paper feeding.
When scanning thin documents, you may see an impression
of the underside of the auto document feeder in your scans. If
so, remove the auto document feeder and re-install the
document cover as described on page 62.