Filter
Top Products
65
Removing the Paper Path Guide
1. Turn off the scanner.
2. Disconnect the cable and remove the
ADF.
3. Gently pull out the paper support.
4. Place the ADF on the document
table upside down, with the front
of the ADF towards you.
5. Gently pull the two white hooks
up, and then push them back down
out of the rectangular holes.
6. Pull the paper path guide upwards
and out to remove it.
To clean the paper path guide, see Cleaning
the Paper Path Guide below. To reattach
the paper path guide, see Attaching the
Paper Path Guide below.