Filter
Top Products
18
5. When the Scanner Software Installation screen appears, click
Install Mac SCSI
Drivers
.
6. Click
Yes
when asked if you want to restart your computer when the installation
is finished.
7. When the Adaptec Installer window appears,
select the hard drive where you want to install
the driver (your startup hard drive is selected by
default) and click
Install
.
8. If the installer prompts you to restart
your computer, click
Restart
or
Continue
to let it perform the restart.
Once the SCSI card and its software are installed on your computer, you can install
your scanning software, following the instructions in Install the Scanner Software,
on page 19.
click here