Filter
Top Products
17
6. In the Manufacturers list, click
Adaptec
.
7. In the SCSI Adapter list, click
Adaptec
AHA-294X/AHA-394X or AIC-78XX PCI SCSI
Controller
.
8. Click
OK
. If you see a prompt to install the
Windows NT CD-ROM, insert it and click
OK
.
9. The necessary driver files are copied to your hard drive, then you see a prompt to
restart your system.
10. Click
Yes
. Be sure to close any open windows and restart.
Once the SCSI card and its software are installed on your computer, you can install
your scanning software, following the instructions in Install the Scanner Software
on page 19.
Installing the SCSI Driver Software for the
Macintosh
Installing the SCSI driver software is easyjust follow the steps listed below:
1. Turn on your computer. Disable any anti-virus programs.
2. Insert the Macintosh EPSON Perfection 1200 CD-ROM in your
drive.
3. If the EPSON window does not automatically open, double-click the
EPSON
CD-ROM icon on your desktop.
4. Double-click the EPSON icon in the EPSON Window.