Filter
Top Products
2150EX Area Velocity Flow Module
Section 2 Preparation and Installation
2-17
The 963 is a float mode charger, using a lower voltage, which
reduces the risk of overcharging. It can fully charge the module
in 16-24 hours maximum.
Teledyne Isco also offers a 2-Amp charger that includes a connect
cable ending in alligator clips, indicator lights for maximum
output and float voltage, and protection against reverse polarity.
It can charge the 2196EX to in about 6 hours. The charger is com-
patible with 125/240 VAC input.
Important Information
Regarding "X" Marking
The ATEX labeling on the serial tag of the 2196EX module shows
a number ending in "X". The X marking indicates that there are
special conditions that must be met to ensure safety, as explained
on page vi in the front of this manual.
WARNING
Ensure that the 2196EX module case is never subjected to
physical impact with enough force to cause cracking during
transport, installation, operation, or storage. Damage to the
case can compromise the unit’s safety.
Figure 2-10 2196EX battery module and labeling
Refer to page vi regarding "X" marking on labels.