Filter
Top Products
93
Floor planning
Each clerk should be assigned to a time zone (work time) and sections (a group of tables in an area).
For example, it is assumed that your POS terminal is programmed so that 2 clerks works at daytime.
Basically those settings may be done by the POS server, while you can change the setting at your POS
terminal. Please follow the procedure shown below for actual setting.
When an end-of-day operation is performed, all settings done on your POS terminal may be reset
depending on programming.
1.
Touch the [FLOOR PLAN] key. The list of floor plans will appear.
2.
Touch the target plan. The clerk assignment screen will appear.