Filter
Top Products
151
19
Terminal Programming
Downloading POS programming data
Programming data set by the POS sever (Back Office) may be downloaded to your POS terminal
automatically or manually depending on the programming setting.
When the programming data is downloaded, all the terminals connected to the POS server are updated.
Automatic downloading
When you turn on your POS terminal, all programming data is copied from the POS sever to the
terminal.
Also any change done at the POS sever are downloaded real time: The change is applied after the
current open receipt is finalized, and automatic broadcast is applied every 10 seconds if the terminal is
busy.
Manual downloading
Programming data is downloaded when the [UPDATE] key is touched.