Sharp UP-X300 Air Conditioner User Manual


 
56
Price change function
You can use this function when you need to change the unit price or associated department of a PLU/
EAN item.
There are two methods for change:
1. Price change mode
You can change the preset price and/or the associated department of a PLU/EAN item permanently.
2. Changing price during a transaction
When you find a wrong price and/or associated department upon transaction, you can correct them at
the time of transaction. With the entry of new price and/or associated department, the preset price and/
or associated department is automatically changed to the new price and/or associated department. The
changed price/associated department is valid until the operation for the End of the Day.
NOTE
In case price change functiuon is prohibited for the item by programming, the warning message
“Change Inhibited Product” will appear. Touch the [CL] key to cancel.
Price change mode
1.
Touch the [PRICE CHANGE] key.
2.
Enter an objective item.
Code entry:
PLU/EAN code
[PLU/SUB]
Direct PLU entry:
[Direct PLU key]
Scanning an EAN code
3.
The key pad will appear, and the unit price and the associated department code will be displayed
at the Price and Department# columns respectively.
4.
Execute one of the following options.
•Touch [Cancel] to cancel the price change mode.
Enter a new price and/or associated department code, and touch [OK]. The new price and/or
associated department code are registered.