Filter
Top Products
53
WASTE mode
This mode is used to throw away an article which has already been prepared and is no longer
serviceable.
1.
Touch the [WASTE] key. The POS terminal will enter to the WASTE mode. (The trash can icon
appears at the information/status window.)
2.
Enter items to be wasted. (Please refer to item registration section.)
3.
Touch the [WASTE] key again to quit the WASTE mode.
NOTE
• PLU entries are only allowed in the WASTE mode, and direct and indirect void operations are also
allowed in this mode.
• When a WASTE mode transaction is finalized, the drawer does not open.
• The consecutive number is incremented every WASTE mode transaction.
• When the WASTE mode is activated by touching the [WASTE] key, the mode icon (trash can) is
displayed.
• Condiment compulsory may be ignored depending on programming.