Filter
Top Products
89
To recall a customer information by entering the customer code
1.
Touch the [CUST] key. The customer code entry window will appear.
2.
Enter a customer code, swipe a customer card or scan a barcode. The customer name will
appear on the receipt window (bottom line).
3.
Make item entries.
NOTE
When entering a wrong customer code, you can cancel the operation by following two methods.
• When no item is registered: Touch the [Nosale] key.
• When an item is registered: Operate “subtotal void”.
To recall a customer information by looking up by name
1.
Touch the [CUST] key. The customer code entry window will appear.