Filter
Top Products
152
2.
Select the PLU for which tare is to be changed, and touch [OK]. The following window will appear.
■ Changing tare
When it is necessary to change a plate/package for packaging, use the following procedure to change
the tare number. This change affects all terminals in the same revenue center and is valid until the
operation of end of session.
1.
Touch the [CHANGE TARE] key. The tare list window will appear.
Changing programming settings
All programming settings necessary for your POS terminal are done at the POS sever. However, on the
terminal you can temporarily change some programming settings depending your need.
■ Programming list
Price change Use price change function. New price are distributed to all satellites.
EAN/PLU creation Use EAN/PLU learning function.
Customer creation Use customer learning function.
Low stock entry Use countdown item function.
Changing tare See the procedure below.