Filter
Top Products
Troubleshooting
74
4
HDD Full The maximum HDD area size
for form/font has been ex-
ceeded.
Delete the disused form /font
types.
An HDD overflow error oc-
curred during Sample Print or
Lacked Print.
Delete the stored files or re-
duce the size of the Sample
Print file or Lacked Print file.
HDD Not Installed The user tries to print the
Lacked Print data without
HDD installed.
If you use the Locked Print
feature, make sure to install
HDD. If the error continues,
contact your sales or service
representative.
I/O Buffer Overflow The maximum size of the I/O
buffer has been exceeded.
Increase the size of the I/O
buffer through the I/F Setup.
Invalid Password Try Again The entered password with
the control panel is not cor-
rect.
Enter the correct password
with the control panel.
Load Correct Size Paper
/Press # To Continue
The paper size setting in the
tray differs from that of actual
paper size in the tray.
Load {paper size} paper with
the selected feed direction into
the tray, and then change the
paper size with the control
panel.
Or press {
{{
{Form Feed}
}}
}, and se-
lect the tray with the opera-
tional panel.
Or press {
{{
{Job Reset}
}}
} to cancel
the print job.
Load Paper Tray # The indicated tray is out of pa-
per. #: tray number
Load paper into the indicated
paper tray.
Load Paper
/Paper Size: Paper Type:
1:The printer received a re-
quest for a paper type, or pa-
per size not available in the
printer, and Tray Locking is
not applicable.
2:The paper type and size
loaded in the tray which the
printer searched using Tray
Locking is Invalid for Duplex
Print.
Change the setting of the indi-
cated paper input tray, or
press {
{{
{Job Reset}
}}
}. Form Feed
is not applicable here.
Menu Protected Cannot
Change
The menu is protected and the
setting cannot be changed.
Wait for two seconds until the
previous display appears.
No Files Exist There are no files available for
Sample Print job or Locked
Print job.
Wait for two seconds until the
previous display appears.
Messages/Second messages Description Solution
JupP1k_GB_Mainte_F_FM.book Page 74 Thursday, August 22, 2002 4:23 PM