Filter
Top Products
Troubleshooting
98
4
Removing Jammed Staples
When "Add Staples " appears on the
panel display, or when the printer
does not staple even after it is in-
structed to, the staples might be
jammed.
A
AA
A
Open the front cover for the 2
Tray Finisher.
The stapler is attached to the posi-
tion shown in the illustration.
B
BB
B
Remove the cartridge by pulling
the green knob in the direction of
the arrow.
C
CC
C
Open the face plate of the car-
tridge to unlock it.
D
DD
D
Remove the jammed staples.
E
EE
E
Close the face plate of the car-
tridge until it clicks into place.
Add Staples
ZDJP216J
ZDJP217J
ZDJP227J
ZDJP228J
ZDJP229J
JupP1k_GB_Mainte_F_FM.book Page 98 Thursday, August 22, 2002 4:23 PM